Full Demo Video
Real Product Demo
Want More for Less? The Choice Is Clear
Yoswit Smart Switch
Schneider (ULTI Ezinstall3)
Leviton Incandescent Scene Capable Switch
LUTRON Caseta Wireless
|2-Wire Compatible||(Limited Watt)|
|Available Socket Type||55/86/118/120||86/120||86/120|
We support IOS 7.0 or above versions. Also, we have separate applications with different resolution for iPhone and iPad.
We support Android 4.3 or above versions. It's the first Android version with Bluetooth Smart support which has just been released on Aug 2013.
|Product Name||Yoswit Smart 3-way Switch|
|Compliance||CE, FCC, RoHS|
|Manufacturer||Designed by Yoswit in Hong Kong. Assembled in China.|
|Surface Materials||V0 flame-resistant PC+ABS|
|Socket Type||Socket 86|
|Storage Conditions||-20°C to 60°C|
|Operating Temperature Range||-10°C to 40°C|
|Ingress Protection (IP)||20|
|Operating Humidity Range||0-90% relative humidity, non-condensing|
|Frequency||50/60Hz auto detected at power-up|
|Resistive Load Current||Max 6A|
|Inductive Load Current||Max 2A|
|Minimum Load Power||5 watt (*for 2-wire [without neutral wire] installation only)|
|Standby Power||<0.1 watt|
|Wiring Options||Wiring details available on the Installation page|
|Product Compatibility||Bluetooth Smart Ready products|
|Radio Transmission Power||0~5 dBm|
|Bluetooth Range||Open area: >50m; indoor: 10-20m|
|Bluetooth Version||Bluetooth 4.2|
|What's in the Box|
Full Demo Video
Real Product Demo
Wireless Switch Market Overview
With Neutral Wire
Without Neutral Wire
One model avaliable 1 model supports dimmable LED, CFL, incandescent and halogen bulbs
|On/Off / Dimmer Switch||One model supports Incandescent Lights Only|
|Arteor / Belanko / Mallia||N/A|
|GE Z-Wave Products||One model supports Incandescent Lights Only|
|Decora® Digital / Decora® Rocker Slide / Renu®||Vizia RF +®|
Comparison (Without Neutral Wire)
|Compatibility (Bulb Type)|
|Normal LED||Not specific||Not specific||Not specific|
|Magnetic Low-Voltage||Not specific|
|Electronic Low-Voltage||Not specific|
|Fluorescent lighting loads||Not specific|
|Central Hub||Not Required||Required||Required||Required||Required|
|Device Pairing||Not Required||Required||Required||Required||Required|
|Price||$54.90 - 69.90||$54.95 - 72.00||$56.99||$99.00||$49.99|
|Hub Price||No Hub Required||$59.95 - 80.00||$99.00||$99.00||$79.99|
|Voltage||100 - 240V||120V||120V||120V||120V|
|Socket Type||55 / 86 / 118 / 120||120 Only||120 Only||120 Only||120 Only|
|Color||23 Colors||4 Colors||White Only||3 Colors||6 Colors|
To prevent severe shock or electrocution, always disconnect the power at the service panel before installation. Only licensed electricians should carry out the installation.
Option 1: If you want to connect Yoswit 3-way switch with common 3-way switch, remove one switch among a pair of 3-way switches.
Disconnect the wires of the switches and make sure that there is about 5mm of bare wire exposing.
Insert a small, flat screwdriver in notches on wall plate and twist gently to pry from frame to remove wall plate.
Connect the wires to the switch case. Make sure that the wires are secure.
To reduce risk of electrical shock, unit shall be properly grounded in accordance with local regulations or codes. Failure to connect the ground wire will result in an unsafe installation that could lead to personal injury.
Option 1: Connect Yoswit 3-way switch with common 3-way switch, 2-wire (without neutral wire)
Option 2: Connect Yoswit 3-way switch with common 3-way switch, 3-wire (with neutral wire)
Option 3: Connect Two Yoswit 3-way switches, 2-wire (without neutral wire)
Option 4: Connect Two Yoswit 3-way switches, 3-wire (with neutral wire)
Fasten the switch on wall by placing the proper wall mount components.
Turn on the circuit breaker and connect to the power.
Test your switch by tapping 2 to 3 times. Your lights will be on/off.
Snap wall plate to frame. There are four click-stops for adjusting the fit of the wall plate to the switch and the wall.
Installation - LED Power Stabilizer (Optional)
After 2-wire (without neutral wire) wiring, in case you encountered conditions of circuit instability, lightings gleaming or no light, you may (i) adopt 3-wire (with neutral wire) wiring method, or (ii) place the power driver at two ends of any one lamp as the diagram below:
Download the Yoswit App to your smart device and enjoy it now!
|Certification||CE EMC CE LVD FCC RoHS|
|Leaflet||Smart Light Switch Full Catalogue|
|Yoswit App (Android Apk)||Download|